Ruijie RG-S5000-24GT4MS-E - Page 22

Hardware Installation and Reference Guide Product Overview
19
LED
LED
Panel Identification
Status
Description
System status
LED
Status
Blinking
green
The system is being initialized.
Solid green
The system is operating normally.
Solid yellow
A system over-temperature alarm is
generated.
Solid red
1. The temperature severely exceeds the
threshold, and the system restarts.
2. A system failure occurs.
Port LED mode
indicator
LED Mode
Solid green
The indicator shows the switching status.
Solid yellow
The indicator shows the PoE status.
1000 Mbps RJ45
port LED
1-24
Off
No link is detected for this port.
Solid green
The port has a 10/100/1000 Mbps link up.
Blinking
The port is receiving or transmitting data.
PoE status LED of
RJ45 port
1-24
Off
PoE is disabled.
Solid green
PoE is enabled.
Blinking
PoE overload occurs.
SFP port status
LED
25F-28F
Off
No link is detected for this port.
Solid green
The port has a link up.
Blinking
The port is receiving or transmitting data.
Solid yellow
The optical attenuation value exceeds the
value specified in the communication
quality requirements.
Solid red
The optical module is in position, but the
optical module fails or an optical link failure
occurs.