Copyright ©2022 Ruko All Rights Reserved.
9
F11GIM User Manual
4) Do not interfere with the gimbal by external forces or pick up the
aircraft during self-inspection (After compass and Gyroscope
calibration, the gimbal will enter self-inspection for 20 seconds).
5) The Gimbal cannot work before/ during the compass and gyro
calibration, and it's normal to see that the gimbal is not kept horizontal.
Put the Aircraft on a level surface after calibration, then the gimbal
will start to work after 20 seconds.
Picking up the Aircraft
(during self-inspection)
Touching the camera
Before Start
During Compass and Gyro calibration
To Next Page
Loading...
