Runxin 17603 User Manual

MODEL F73（17603）
14
2.2.Basic Setting & Usage
A. Parameter specification
Function
Indicat
or
Factory
Default
Parameter
Set Range
Instruction
Time of
Day
Random
00:00～
23:59
Set the time of day when use； “ : ”
flash.
Control
Mode
A-01
A-01
A-01
Down-flow regeneration,
regeneration immediately when the
available volume of treated water
drops to zero (0).
A-03
Intelligent Down-flow regeneration,
regenerate starts when the available
volume of treated water calculated
according parameters drops to zero
(0).
A-11
Up-flow regenerate immediately
when the available volume of treated
water drops to zero (0).
A-13
Intelligent Up-flow regeneration,
regenerate starts when the available
volume of treated water calculated
according parameters drops to zero
(0).
Interval
Backwash
Times
F-00
F-00
0～20
F-0X means X times no backwash.
Water
Treatment
Capacity
10.00
10.00
0～99.99
Water treatment capacity in one
circle (m
3
).
Unit Mode
HU-01
HU-01
01, 02, 03
01-m
3
；02-gal；03-L
Resin
Volume
50L
50L
5－500L
The resin volume in tank (L).
Feed
water
hardness
Yd1.2
1.2
0.1－9.9
Hardness of feed water (mmol/L).
Exchange
Factor
AL.65
0.65
0.30－0.99
Relate to the raw water hardness.
When hardness is higher, the factor
is smaller.

Runxin 17603 Specifications

General

Brand	Runxin
Model	17603
Category	Control Unit
Language	English