Runxin N74A1 - Parameter Set

MODEL: N74A1-63510/N74A3-63610/N74B1-63510B/N74B3-63610B
Before the valve put into use, please fill in the below content so as
to help us to refer in the future.
Softener System Configuration
Tank Size：Dia. mm，Height mm；
Resin Volume L；Brine Tank Capacity L；
Hardness of Raw Water mmol/L；
Pressure of Inlet Water MPa；
Control Valve Model ；Number ；
The Specification of Drain Line Flow Control ；
Injector No. .
Water Source: Ground-water□ Filtered Ground-water □Tap Water □
Other .
Parameter Set
Parameter
Unit
Factory
Default
Actual Value
Control Mode A-01（02，03，04）
/
A-01
Water Treatment Capacity（Meter
Type）
m
3
80
Service Days（Time clock type by
Days）
D.
03
Service Hours（Time clock type by
Hours）
H.
20
Regeneration Time
/
02∶00
Backwash Time
min.
10
Brine & Slow Rinse Time
min.
60
Brine Refill Time
min.
05
Fast Rinse Time
min.
10
Interval Regeneration Days
D.
30
Output Mode b-01（02）
/
b-01
If there is no special requirement when product purchase, we
choose 3# drain line flow control.