Child Lock
You can activate Child Lock on the appliance by simultaneously
holding buttons ‘Spin’ and ‘Delay’ for at least 3 seconds. Once
activated, ‘CL’ will flash on the display, and all functions will be
locked.
- If the dial is moved into the ‘Off’ position, then turned to any
programme, the appliance will continue the previously selected
cycle.
To deactivate Child Lock, simultaneously hold the ‘Spin’ and ‘Delay’
buttons for at least 3 seconds until ‘CL’ disappears from the display.
Cancelling a Programme
To cancel a running programme at any time in a cycle, turn the
programme dial to the ‘OFF’ position.
WARNING – your appliance may still have water inside. Before
opening the door you MUST turn the programme dial to the
‘SPIN/DRAIN’ programme, which will begin the drainage cycle and
cancel the previous programme.
In the event of a power cut, we recommend selecting ‘SPIN/DRAIN’
before running any other programme or opening the door.
To Next Page
Loading...
