Before using your machine for laundry, we recommend you perform
a ‘first-time’ use cycle.
Add detergent such as a washing powder as highlighted in this
instruction manual, but WITHOUT loading any laundry.
Select programme ‘Eco 40/60’, and adjust the temperature to 90°C,
and the spin speed to 1200RPM.
Press the Start/Pause button, and allow the machine to run the
whole cycle.
Once complete, your appliance is ready to use.
We recommend you always leave the door open after any kind of
cycle to allow the appliance to fully dry and prevent build-up of
mould.