Russell Hobbs 11 Series

P a g e | 23
11 Series Washing Machines Revision 1.6
ERROR CODES
Code
Fault
Solution
E01
Door not closed
Close the door until you hear a click. If
the fault persists, turn off the appliance
and contact customer services.
E02
Water pressure is low
Check the water feed is turned on.
Check the mains supply is in operation
by running a tap. If the problem
persists, the appliance will switch off
automatically. Contact customer
services.
E03
Pump fault/pump
filter clogged
Clean the pump filter. If the problem
persists, contact customer services.
E04
Excess water
detected
Machine will automatically drain the
water. Once drained, turn off the tap
and contact customer services.