14
6. The lights on the buttons will stop flashing and
turn a solid white colour when the machine has
heated up. Heating up will take approximately
forty (40) seconds.
7. Before pressing any buttons, make sure that:
o the operating handle is closed without
a capsule inside
o the water reservoir is full
o the water reservoir is firmly in place to
prevent leakage
o the drip tray with the used capsule
container/ bin is completely inserted
(never operate the machine without the
drip tray set in place (part D shown in
“PARTS DIAGRAM”) or hot water will
run out when opening handle
o a large bowl ( 250ml size or larger) is
placed under the dispenser spout
8. Now press the Lungo coffee button.
9. Press the middle button to start the rinsing
process.
10. You will notice water running from the
dispenser spout into the large bowl or cup.
11. Open the operating handle once the rinsing
process has stopped automatically.
12. Empty the large bowl.
13. The rinsing process is now completed.
PRE-BREWING OPTION
Pre-brewing is a great function as it will ensure brewing of espressos at a better temperature and
allow for optimum coffee extraction. You can turn this function OFF if desired or choose a different
pre-brewing mode.
To Next Page
Loading...
