Russell Hobbs RHCM50

15
To enter the pre-brew mode, please follow the instructions below:
1. Turn the machine OFF.
2. Press the middle button and hold the
button down (pressed).
3. Switch the machine ON whilst still pressing
the middle button.
4. Release the button after three (3) seconds
or once you have heard two (2) beeps.
5. Now choose the desired setting.
6. Press the middle button in order to choose
the preferred setting. Referring to the
status table:
Status
Description
Function
Solid/ steady red,
round indicator light.
Disable the pre-brewing
function.
Blue flashing, round
indicator light.
Short pre-brewing.
Solid/ steady blue,
round indicator light.
Long pre-brewing
(default).
BREWING COFFEE
1. Place an empty cup under the dispenser
spout. For smaller cups, you may lower the
dispensing spout down so that it is closer to
the lip of the cup.
2. Move the operating handle back completely.