22
Tip: if you need to empty the bowl under the dispenser spout during the decalcifying process, you
can press the button so that it enters a ‘pause’ mode. Press it again to continue.
FACTORY RESET
If you would like to reset/ restore the appliance to its default settings, please follow the instructions
below:
1. Turn the coffee maker OFF.
2. Press the Lungo button and hold it pressed
in.
3. Switch the coffee maker ON while the
Lungo button is still being pressed.
4. Release the Lungo button after three (3)
seconds or when you hear two (2) beeps
5. The factory reset is now complete.
6. After above operation, the machine is reset
to its factory default setting. The following
parameters are reset and now in place:
o Coffee brewing size: 25ml, 40ml
and 110ml
o Pre-brew: ON
Tip: reset the machine when it is warmed up so that you can easily see flashing indicator lights.
To Next Page
Loading...
