Russell Hobbs RHCM50

19
7. Throw out the old water from the water
reservoir. Rinse the water reservoir with
fresh water.
8. After emptying/ cleaning, reassemble the
parts in reverse order and insert them back
into/ onto the appliance so that they are
correctly in place.
Note: the plastic parts of the appliance are not dishwasher safe.
CLEANING THE COFFEE MACHINE
1. Always pull the plug out from the main power supply and ensure that the coffee machine is
switched OFF before cleaning the machine
2. Never immerse the machine in water or clean it under running water. Clean the machine
with a dry cloth.
3. Never use abrasive cleaning agents or materials (use e.g. dry rags or kitchen paper).
STEAMING OUT/ STORAGE/ TRANSPORT
Prior to long periods of not using the machine or for storage or transport at temperatures below 5
°C, it is essential to steam out the machine. This removes water from the system to prevent
internal frost damage.
1. Turn the machine ON.
2. Empty the water reservoir and place it back
into its correct position.
3. Put an empty cup under the dispensing
spout.
4. Press the Lungo button to start brewing.
5. The steaming out process has now started.
6. After the pump stops automatically, the
steaming out process is completed.
7. Turn the machine OFF and unplug from its power supply.
CAUTION: Beware of hot steam as there is danger of scalding!