17
dispensing spout down so that it is closer to
the lip of the cup.
2. Move the operating handle back completely.
3. Insert a capsule so that it falls straight into the
compartment correctly.
4. Close the operating handle firmly to load the
capsule.
5. Press the desired button and hold it pressed
down. Once the desired volume has been
reached, release the button. The button is
now programmed to your preference.
6. After the programming, the dispensing size will have been recorded in the appliances
memory. For next use, press the button normally and press only once.
7. You may program the other buttons if desired.
Note the volume range:
25ml~150ml based on Nespresso “Ristretto” capsule & “Lungo” capsule.
The default size is 25ml (Short Espresso), 40ml (Normal Espresso) and 110ml (Lungo
Espresso).
Tip: when the programming process has finished, leave the machine for 30 seconds so that it may
cool down prior to opening the operating handle.
The flashing sequence equates to one (1) second = one (1) flash. You can count the flashes to
determine the brewing time.
To Next Page
Loading...
