brewing chamber without
the drip tray set in place.
The capsule drops down
directly into the used
capsule container before I
have started the loading
and brewing process.
Try it again with a slight
different angle.
Use a new capsule.
There are occasional drops
driping out of the dispenser
spout.
The heating system remains
warm.
Occasional drops are normal, it
is not a defect.
Coffee comes out in drips/
coffee goes into the used
capsule container/ bin.
The ground coffee in the
capsule is ground too fine to let
water pass through sufficiently.
Change to a new capsule.
Use another Nespresso or
compatible capsule.
Capsule is not place well in
brewing chamber.
Change to a Nespresso
capsule.
Push the capsule a little
deeper to align with the
capsule chamber.
To Next Page
Loading...
