BA.GB.12-27409-05-07-FTA-jr
6.4.3 Switch on or off control stand „Emergency Control“:
Note
The control stand „emergency control“ at the Steiger-
substructure has to be closed after each utilisation in order
to secure the machine against impermissible operation.
The „Emergency control“ may only be used in case of emer-
gency for emergency lowering in mutual agreement of the
working cage crew and for maintenance purposes.
Pre-condition:
Operation is switching-on.
Execution at Steiger-substructure
Control stand
„Emergency control“
Open the door of the switch box
„Emergency control“.
or
Control stand
„Emergency control“
Close the door of the switch box
„Emergency control“.