BA.GB.12-27409-05-07-FTA-jr
ried out in the reverse sequence.
The Steiger-substructure and the jacks might be dam-
aged, if the vertical jacks are considerably unequally
extended or retracted. You have to take care that the
jacks are extended and retracted in such a way that the
vehicle remains without warping as far as possible.
The doors to the driver's cab have to be shut! In case
one door of the driver’s cab is open (only a few millime-
tres), the stabilising jacks cannot be moved by the con-
trol system.
Note
As soon as a jack leaves its basic position, the pilot lamp
„Basic position“ will shine.
The inclination of the Ruthmann-Steiger must be checked by
means of the levelling indicator and if necessary compen-
sated by extending individually the stabilizing jack vertically
according to the permissible siting inclination.
To Next Page
Loading...
