5.3 UV Bulb Replacement
Remove the old bulb from the bulb receptacle first, by twisting it 90 degrees in
either direction and second, by pulling the bulb downward. Follow your facility
disposal protocols with consideration as to how the RXAir unit was used.
Install the new bulb, taking special care to handle the bulb at each metal end;
touching the glass will decrease the life of the bulb. Insert the bulb and then twist
it 90 degrees to secure in place.
Figure 5: UV Bulb Replacement
For replacement of other serviceable parts please contact RXAir Customer
Service at (800) 231-3248.
To Next Page