RXAIR RX3000 - Trouble Shooting

RX3000 Manual & Operating Instructions 7/10
Page 15 of 25
5.5 Trouble Shooting
Problem - Possible Causes and Remedies
1. Unit does not operate –
 Unit may be turned off-check switches
 Unit possibly unplugged
 Check or change power outlet
 Ensure rear door is firmly secured
 Check fuse-only replace with Bussman part
 #MDL-5 (Refer to Fig 6 on the next page)
 Contact your representative or RxAir
2. Replace filter indicator -
 Check for restrictions in front of filter
 Check and/or change pre-filter
 Check filter age-may need new filter
 Contact your representative or RxAir
3. Replace UV bulb indicator - Check bulb installation
 Replace bulb
 Contact your representative or RxAir
4. Unit emits unusual noise or smell - Turn unit off
 Unplug unit
 Contact your representative or RxAir
Note: Always contact an authorized RxAir representative or distributor for service of any
RxAir product. Call RxAir Customer Service for assistance in locating the nearest
representative. (800) 231-3248 or (972) 233-2777
Fig. B. Shows the Pre-Filter being installed. Ensure the arrow showing direction of airflow points upwards and
that the filter seats onto the support bars shown in Fig. A.