EasyManuals Logo

Ryobi RCS4235B Type III User Manual

Ryobi RCS4235B Type III
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
7
English (Original Instructions)
Keep all bystanders and animals at least 15m away.
Add bar and chain oil every time you add fuel to the chainsaw.
Guaranteed sound power level is 114 dB.
Conforms to all regulatory standards in the country in the EU where the product is purchased.
Conforms to all regulatory standards in Russia where the product is purchased.
Use unleaded petrol intended for motor vehicle use with an octane rating of 91 ([R+M]/2) or
higher.
Use 2-stroke oil for air cooled engines.
Mix the fuel mix thoroughly and also each time before refueling.
Turn ignition switch to the ON position.
Set the chain brake to the BRAKE position.
Fully press and release the primer bulb at least 10 times.
Pull the choke lever all the way out the START position.
Pull the starter rope until the rst ring of the engine is heard (no more than ve pulls).
Set the choke lever to the RUN position.
Pull starter grip until the engine starts.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ryobi RCS4235B Type III and is the answer not in the manual?

Ryobi RCS4235B Type III Specifications

General IconGeneral
BrandRyobi
ModelRCS4235B Type III
CategoryChainsaw
LanguageEnglish

Related product manuals