Depress the trigger release.
Release the brake lever to the RUN position.
Beware of chain saw kickback and avoid contact with bar tip.
Risk of re/ammable materials
Bar and chain lubricant
Rotate to adjust chain tension
+ = Tighten/ - = Loosen the chain
Moving direction of the chain
H/L: High/Low speed adjustment needle, T: Idle adjustment screw
Rotation direction to tighten the guide bar
Rotation direction to loosen the guide bar
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOLS SIGNAL MEANING
DANGER
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
CAUTION
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
To Next Page
Loading...
Need help?
General
