Ryobi RLT26CDSE - GETTING STARTED

9
GETTING STARTED
1
(50 : 1)
50 : 1 / 2%
2
Use synthetic 2-stroke lubricant only. Do not use automotive
lubricant or 2-stroke outboard lubricant. Mix 2% synthetic 2-stroke
lubricant into the petrol. This is a 50:1 ratio.
3
1
2
2
6
Remove the screw and wing nut, and then attach the D-handle.
1
2
3
4
5
Attach the lower shaft.