EasyManua.ls Logo

Ryobi RY3714 User Manual

Ryobi RY3714
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
RY3714/RY3714VNM/
14 in. 38cc Chain Saw
Scie à chaîne de 38 cc de 35 cm (14 po)
Motosierra de 35 cm (14 pulg.), 38 cc
RY3716/ RY3716VNM/
16 in. 38cc Chain Saw
Scie à chaîne de 38 cc de 40 cm (16 po)
Motosierra de 40 cm (16 pulg.), 38 cc
ENGINE FAMILY: *HCPS.0384CA
FAMILLE DE MOTEUR : *HCPS.0384CA
FAMILIA DE MOTOR: *HCPS.0384CA
NOTICE AVIS AVISO
Do not use E15 or E85 fuel (or fuel containing greater than 10% ethanol) in this product. It is
a violation of federal law and will damage the unit and void your warranty.
Ne pas utiliser d’essence E15 ou E85 (ou un carburant contenant plus de 10 % d’éthanol) dans
ce produit. Une telle utilisation représente une violation de la loi fédérale et endommagera l’appareil et annulera la garantie.
No utilice combustibles E15 o E85 (ni combustibles que contengan más de 10 % de etanol) con este producto. Esto constituye
una violación a la ley federal, dañará la unidad y anulará la garantía.
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
TABLE OF CONTENTS
General Safety Rules ...................... 2-3
Specific Safety Rules ...................... 3-4
Symbols .......................................... 5-6
Glossary of Terms ...............................7
Features .......................................... 8-9
Assembly ...................................... 9-10
Operation .................................... 10-24
Maintenance ............................... 24-37
Bar and Chain Combinations ............ 37
Troubleshooting .......................... 38-39
Parts Ordering/Service ........ Back Page
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE DES MATIÈRES
Règles de sécurité générales .......... 2-3
Règles de sécurité particulières ...... 3-4
Symboles ........................................ 5-6
Glossaire .............................................7
Caractéristiques .............................. 8-9
Assemblage .................................. 9-10
Utilisation .................................... 10-24
Entretien ...................................... 24-38
Combinaisons de guide et chaîne ....38
Dépannage .................................. 39-40
Commande de pièces/
réparation .......................... Páge arrière
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
ÍNDICE DE CONTENIDO
Reglas de seguridad generales ...... 2-3
Reglas de seguridad específicas .... 3-4
Símbolos ......................................... 5-6
Glosario de términos ........................... 7
Características ................................ 8-9
Armado ......................................... 9-10
Funcionamiento .......................... 10-24
Mantenimiento ............................ 24-38
Combinaciones de barra y cadena ...38
Corrección de problemas ........... 39-40
Pedidos de piezas/
servicio ........................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Questions and Answers:

Ryobi RY3714 Specifications

General IconGeneral
Engine Displacement37 cc
Bar Length14 inches
Power SourceGasoline
Chain Pitch3/8 inch
Chain Gauge0.050 in

Summary

Ethanol Fuel Notice

General Safety Rules

Specific Safety Rules

Refueling Precautions

Safe handling of fuel to reduce fire and burn risks.

Understanding Kickback

Explanation of kickback and safety measures to prevent serious injury.

Symbols and Signal Word Meanings

Signal Words and Meanings

Explains risk levels associated with product signals like DANGER, WARNING, CAUTION, NOTICE.

Glossary of Terms

Product Features Overview

Product Specifications

Details technical specifications like bar length, chain pitch, gauge, engine displacement, and tank capacities.

Assembly and Unpacking

Unpacking the Chain Saw

Instructions for carefully removing the tool and accessories from the box and checking contents.

Operation: Key Procedures

Fueling and Lubrication

Guidance on ethanol fuels, mixing, filling tank, and bar/chain lubrication.

Starting and Stopping the Engine

Procedures for safely starting, stopping, and adjusting the idle speed of the engine.

Kickback and Cutting Safety

Covers kickback, grip, stance, work area, and basic cutting procedures for safe operation.

Bucking Logs

Bucking Techniques

Covers standard bucking, using wedges, and cutting logs under stress.

Pruning Live Trees

Maintenance Procedures

Routine Maintenance Tasks

Covers springpoles, general cleaning, air filter, and engine cleaning.

Replacing Key Components

Detailed steps for replacing the guide bar, chain, and adjusting chain tension.

Sharpening the Chain Cutters

Top Plate Filing Angle

Correct filing angle for the top plate of the chain cutter for optimal performance.

Side Plate Filing Angle

Correct filing angle for the side plate of the chain cutter to prevent kickback and ensure cutting ability.

Maintaining Depth Gauge Clearance

Maintaining the Guide Bar

Mounting the SAFE-T-TIP Nose Guard

Adjusting the Carburetor

Replacing the Spark Plug

Inspecting and Cleaning the Chain Brake

Storing the Chain Saw

High Altitude Engine Operation

Maintenance Schedule

Bar and Chain Combinations

Troubleshooting Common Problems

Parts and Service Information

Related product manuals