Ryobi TS1142L User Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE
Your miter saw has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
OPERATOR’S MANUAL
7-1/4 in. Compound Miter Saw
TS1142L - Double Insulated

Ryobi TS1142L Specifications

General

Brand	Ryobi
Model	TS1142L
Category	Saw
Language	English

Summary

General Safety Rules

Specific Safety Rules

Symbols

Signal Word Definitions

Explains risk levels using signal words like DANGER, WARNING, CAUTION, NOTICE.

Symbol Meanings

Defines common symbols used on the tool and their meanings.

Electrical

Double Insulation

Explains the concept of double insulation and its safety benefits for electric tools.

Extension Cords

Provides guidance on selecting and using appropriate extension cords for power tools.

Electrical Connection

Details the power requirements and connection procedures for the tool.

Glossary of Terms

Features

Product Specifications

Lists the technical specifications of the compound miter saw, including dimensions and performance.

Key Components and Operation

Details major components like motor, blade, controls, and their functions.

Tools Needed

Loose Parts List

Assembly

Unpacking and Initial Inspection

Instructions for safely removing the miter saw from its packaging and initial inspection.

Installing Safety Bracket

Steps for attaching the rear bracket to prevent tipping and ensure stability.

Blade Installation and Replacement

Detailed procedure for safely installing or removing the saw blade.

Mounting Holes

Instructions for securely mounting the saw to a workbench or stand.

Squaring the Blade

Guide for aligning the saw blade parallel to the fence or table for accurate cuts.

Operation

Cross Cutting

Instructions for making straight cuts across the grain of the workpiece.

Bevel Cutting

Procedure for making cuts at an angle to the workpiece surface.

Compound Miter Cutting

Guide for making cuts with both miter and bevel angles simultaneously.

Crown Molding Cutting

Specific techniques for cutting crown molding accurately for corners.

Adjustments

Positive Stop Adjustments

How to adjust the preset stops for common angles like 0° and 45°.

Pivot Adjustments

Information regarding adjustments for the saw arm's vertical and tilting movement.

Laser Guide Adjustment

Steps for aligning the laser guide line with the blade for precise cuts.

Miter Lock Lever Adjustment

Procedure for ensuring the miter table locks securely at desired angles.

Maintenance

General Maintenance

Routine cleaning and care instructions for the tool's plastic and metal parts.

Lubrication

Information on the tool's lubrication requirements, noting it's pre-lubricated for life.

Brush Replacement

Guide for checking and replacing worn motor brushes.

California Proposition 65

Service

Service Contacts

Information on contacting service centers for repairs and parts.

Model and Serial Number Record

Space to record the tool's model and serial number for service purposes.

Ordering Repair Parts

Instructions on how to order replacement parts, specifying necessary information.