Ryobi TS1143L - User Manual

WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
 General Safety Rules .......................2-3
 Miter Saw Safety Rules ...................3-4
 Additional Safety Rules ...................4-5
 Symbols ..............................................6
 Electrical ............................................. 7
 Glossary of Terms ...............................8
 Features .........................................9-11
 Tools Needed ...................................12
 Loose Parts List ................................12
 Assembly .....................................13-20
 Operation .....................................21-28
 Adjustments ................................29-30
 Maintenance ..................................... 31
 Parts Ordering / Service ..... Back Page
TABLE DES MATIÈRES
****************
 Règles de sécurité générales ..........2-3
 Règles de sécurité scie à onglets ....3-4
 Règles de sécurité supplémentaires ...4-5
 Symboles ............................................6
 Caractéristiques électriques ...............7
 Glossaire .............................................8
 Caractéristiques ............................9-11
 Outils nécessaires ............................12
 Liste des pièces détachées ..............12
 Assemblage .................................13-20
 Utilisation .....................................21-28
 Réglages ......................................29-30
 Entretien ...........................................31
 Commande de pièces /
réparation ..........................Page arrière
ÍNDICE DE CONTENIDO
****************
 Reglas de seguridad generales .......2-3
 Reglas de seguridad sierra
ingleteadora ....................................3-4
Advertencias de seguridad
adicionales ......................................4-5
 Símbolos ............................................6
 Aspectos eléctricos ............................ 7
 Glosario de términos ..........................8
 Características ..............................9-11
 Herramientas necesarias ..................12
 Lista de piezas sueltas .....................12
 Armado ........................................13-20
 Funcionamiento ...........................21-28
 Ajustes .........................................29-30
 Mantenimiento ..................................31
 Pedidos de piezas /
servicio .......................... Pág. posterior
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
7-1/4 in. COMPOUND MITER SAW
WITH LASER
SCIE À ONGLETS COMBINÉS
DE 184 mm (7-1/4 po) AVEC LASER
SIERRA INGLETEADORA COMPUESTA
DE 184 mm (7-1/4 pulg.) CON
GUÍA LÁSER
TS1143L

Summary

General Safety Rules

Electrical Safety

Precautions related to power supply, cords, and grounding to prevent shock.

Personal Safety

Measures to ensure user alertness, proper attire, and protective equipment.

Power Tool Use and Care

Instructions for safe operation, adjustments, and maintenance of the power tool.

Miter Saw Specific Safety Rules

Workpiece Handling and Cutting Safety

Safe practices for clamping, feeding, and positioning workpieces during cuts.

Additional Safety Rules

Extension Cord and Electrical Safety

Proper use and inspection of extension cords and understanding polarized plugs.

General Operational Safety

Electrical Information

Double Insulation and Extension Cords

Electrical Connection Requirements

Assembly Instructions

Unpacking and Initial Setup

Critical Assembly Warnings

Essential safety precautions to follow before and during the assembly process.

Mounting and Securing the Saw

Work Surface Mounting Requirements

Instructions for securing the saw to a workbench or stand to prevent tipping.

Blade Replacement Procedure

Securing the Blade

Detailed steps for loosening, removing, and installing the blade bolt and washers.

Blade Orientation and Guard Functionality

Laser Guide Setup and Operation

Aligning the Laser Guide Line

How to use the laser guide to accurately align cuts on the workpiece.

Blade Alignment to Fence

Checking and Adjusting Fence Alignment

Checking and adjusting blade squareness to the miter fence.

Blade Alignment to Miter Table

Checking and Adjusting Table Alignment

Checking and adjusting blade squareness to the miter table.

Operation Guidelines

General Operational Precautions

Performing Miter and Cross Cuts

Miter;Cross Cut Procedure

Workpiece Setup and Safety Checks

Performing Bevel Cuts

Bevel Cut Procedure

Setting Bevel Angles and Workpiece Alignment

Performing Compound Miter Cuts

Compound Miter Cut Procedure

Specialized Cutting Techniques

Cutting Crown Molding

Specific methods and angle settings for accurately cutting crown molding.

Cutting Warped Material

Tool Adjustments

Pre-Adjustment Safety and Checks

Essential safety precautions and initial checks before performing any adjustments.

Pivot and Stop Adjustments

Fine-Tuning Adjustments

Adjusting the Laser Guide

Procedure for calibrating the laser guide line for precise cutting alignment.

Adjusting the Miter Lock Lever

Tool Maintenance and Care

Brush Replacement Procedure

Ryobi TS1143L Specifications

General

Brand	Ryobi
Model	TS1143L
Category	Saw
Language	English