Ryobi TSS121 - Page 19

19 − English
ASSEMBLY
TABLE EXTENSIONS
See Figures 14 - 16.
Table extensions have been provided for both the left and
the right side of the saw.
To install table extensions:
 Remove the screw from the underside of the base.
 Insert the ends of extension into the holes in the sides of
the base.
 Replace screw and tighten to secure the extension in
place.
 Repeat for other extension.
Fig. 15
Fig. 14
Fig. 16
SAW VIEWED FROM BOTTOM
TABLE
EXTENSION
BASE
BASE
TABLE
EXTENSION
TABLE
EXTENSION
SCREW
BASE