Automatic Backflush Filter F450
State: 05.02.2016 – 1.3 Georg Schünemann GmbH, Bremen 2-4
2.2.2 Control of the automatic backflush filter F450
The automatic backflush filter F450 will be controlled via keypad of the electronic
control box or remote-controlled and telemonitored by a host over the serial inter-
face.
The programmable control unit supervises at defined measuring points the pres-
sure within the entry region of the filter. It triggers the flushing process caused by
monitored differential pressure or time-based control algorithm.
The flushing procedure can be released additionally at any time manually
To Next Page
Loading...