Automatic Backflush Filter F450
State: 05.02.2016 – 1.3 Georg Schünemann GmbH, Bremen 5-1
5 Service and operation
The controlling of the automatic backflush filter F450 is done by an electronic
control unit. The parameters will be entered via keyboard or the integrated serial
interface box.
The control unit presents in some sub items different operating possibilities.
In delivery status all parameters are adjusted to base values, so direct operating
is possible with the control. The important parameters for the operation of the fil-
ter can be changed by the operator or by the service. The input is secured by a
password.
The factory setting of the particular control unit is noted in the acceptance report
for the automatic backflush filter F450.
The detailed description of the control unit see appendix “Filter control F450"
To Next Page
Loading...