Menu Operation
Configuring the Picture Menu
• Picture Mode
You can select the type of picture which
best corresponds to your viewing
requirements.
• Brightness
Adjusts the base level of the signal in the
picture.
• Contrast
Adjusts the signal level between black
and white in the picture.
• Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the
picture.
• Saturation
Adjusts intensity of all colours.
• Hue (Only in the NTSC mode)
Adjusts the balance between red and green levels.
• Color Temp
Select the color temperature of the picture.
• Aspect Ratio
You can select the picture size which best corresponds to your viewing requirements.
• PC Setting (In PC mode)
Press the▼button to access the following settings.
Auto Adjust: Adjust the image automatically.
H Position: Centre the image by moving it left or right.
V Position: Centre the image by moving it up or down.
Phase: Minimize horizontal distortion.
Clock: Minimize vertical stripes in the screen image.
• Screen Mode (In HDMI mode)
Press the▼button to access the following settings
Press the▲/▼button to select HDMI Mode, then press the◄/►button to select Auto,
Video or PC.
• Advanced Settings
Press the▼button to access the following settings
NR: Set options to reduce video noise.
MPEG NR: Set options to reduce MPEG noise.
Dynamic Contrast: Automatically adjust picture detail and brightness.
To Next Page
Loading...
Need help?
General
