Saba LVSL4915X - Unsatisfactory Drying Result

Problem Possible Causes What To Do
Unsatisfactory
washing
result
Cloudiness
on glassware
Combination of soft
water and too much
detergent�
Use less detergent if you have soft water
and select a shortest cycle to wash the
glassware and to get them clean�
Black or gray
marks on
dishes
Aluminum utensils
have rubbed against
dishes�
Use a mild abrasive cleaner to eliminate
those marks�
Detergent
left in
dispenser
cups
Dishes block
detergent cups�
Re-loading the dishes properly�
Unsatisfactory
drying result
The dishes
are not
drying
Improper loading
Load the dishwasher as suggested in the
directions�
Too little rinse-aid
Increase the amount of rinse-aid/rell
the rinse-aid dispenser�
Dishes are removed
too soon
Do not empty your dishwasher
immediately after washing� Open the
door slightly so that the steam can
escape� Begin unloading the dishwasher
only once the dishes are barely warm to
the touch� Empty the low basket rst�
This prevents water from dropping o
dishes in the upper basket�
Wrong program has
been selected
In short program the washing
temperature is lower� This also lowers
cleaning performance� Choose a program
with a long washing time�
Use of cutlery with a
low-quality coating
Water drainage is more dicult with
these items� Cutlery or dishes of this
type are not suitable for washing in the
dishwasher�
Error Codes
When some malfunctions come on, the appliance will display
error codes to warn you:
WARNING!
• If overow occurs, turn o the main water supply before
calling a service�
• If there is water in the base pan because of an overll or small
leak, the water should be removed before restarting the
dishwasher�
Codes Meanings Possible Causes
The Rapid light
ickers eetly
Longer inlet
time�
Faucets is not opened, or
water intake is restricted, or
water pressure is too low�
The Glass light
ickers eetly
Overow� Some element of dishwasher
leaks �
113112
GB GB