37
1
2
3
Checking the fuse
CAUTION
Never install a fuse with a larger rat ing,
since this could destroy the en tire elec-
trical system.
The fuse is located behind the inspection
cover (2).
- Turn off the ignition.
- Remove the two screws (1) and open the
inspection cover (2).
- Open the fuse case (3) and remove the
fuse.
- A faulty or blown fuse must be replaced
by a new one with 15 A.
- Check the fuse for correct contact. Loose
fuse will blow.
Installation takes place in reverse order to
disassembly.
NOTES ON MAINTENANCE
To Next Page
Loading...