Sachs Speedforce 50 - Overview and Operation; Digital Clock

8
S
M
OVERVIEW AND OPERATION
NOTE
The Cockpit is supplied by the vehicle bat-
tery. The display is only visible when the
ignition is on.
After disconnecting and reconnecting the
battery the clock time needs to be reset.
M Mode for:
date or time
S Set for:
date and time
Digital clock
Mode and Set
Button M press 1 time
Changing between date and
time
Button M press 2 time
until the month appears
The month value can be set by
pressing button S
Button M press 3 time
until the day appears
The day value can be set by
pressing button S
Button M press 4 time
until the hours appears
The hours value can be set by
pressing button S
Button M press 5 time
until the minutes appears
The minutes value can be set
by pressing button S
Button M press 6 time
End of mode. Date and time is
set and ( : ) fl ashes.
Button S press 1 time
The date value appears for a
moment
Button S press 2 time
The seconds are shown.
Press the button S again to
return to the time value.