Sachs Speedforce 50 - Page 43

43
1
1
2
3
Tail / brake light
Changing the bulb
NOTE
Do not touch the bulb with bare fi ngers. Hold
bulbs with a clean, dry cloth when installing
or re mov ing them.
- Remove the screws (1).
- Carefully remove the tail / brake light
cover (2).
- Push the bulb (3) back and release it by
turning to the left.
- Remove the bulbs.
Installation takes place in reverse order to
disassembly.
Tail / brake light
bulb: 12V 21/5W
NOTES ON MAINTENANCE