Sachs Speedforce 50 - Page 53

53
INSPECTION PLAN
I = Inspection, cleaning, and adjustment
R = Replacement
C = Cleaning (replaced if necessary)
L = Lubrication
Component
Assembly
Before
each
trip
1st service
after
1000 km
Every
3.000 km /
6 months
Every
6.000 km /
12 months
Every
12.000 km /
24 months
Air cleaner (foam fi lter)
IIC R
Fuel fi lter
III R
Spark plug
III R
Ignition time
II
Carburettor (Idle speed)
III
Throttle cable adjustment
III
Transmission oil
IR IR
Transmission check for leakage
III
Crankecase check for leakage
III
Crankecase vetilation
II
Drive belt, roller
II / R
Clutch discs
II / R