Saeco Incanto HD8917 - Weekly Cleaning of the Milk Carafe

3 Lift the milk froth dispensing spout out of the top of the carafe.
4 Remove the suction tube from the milk froth dispensing spout.
5 Rinse the suction tube with lukewarm tap water thoroughly.
Weekly cleaning of the milk carafe
The milk froth dispensing spout consists of 5 components.
Disassamble all components once a week to clean them.
1 Suction tube
2 Rubber support
3 Milk frother
4 Milk frother connection
5 Dispensing spout lid
Disassembling the milk carafe
1 Press the release buttons on both sides of the top of the milk
carafe (1) and lift the top o the milk carafe (2).
2 Turn the dispensing spout lid upside down and hold it rmly in
your hand. Pull the suction tube o the rubber support.
3 Press the release buttons on the milk froth dispensing spout and
remove the milk frother from the the rubber support.
1 2
5
3
4
1
2
1
2
1
English
28
4219_460_3631_2_Lux_Booklet_A5_v2.indd 28 21/07/17 14:30