English
10
51
10 CLEANING AND MAINTENANCE
Unplug the power cord
before performing any
cleaning and/or
maintenance operation.
It is prohibited to perform
cleaning or maintenance
operations on the internal
components of the
vending machine with the
safety microswitch disabling
key inserted.
The Manufacturer declines
any liability for any damage
or malfunctioning caused
by incorrect or poor
maintenance.
During the loading
operations do not stress
any of the live electrical
parts and do not clean
them with damp cloths.
Avoid using chlorine-based
tablets so as to prevent
oxidation phenomena
inside the vending machine.
10.1 General notes for correct
operation
The vending machine and
its non-removable
components must be
cleaned using non abrasive
sponges or damp cloths.
Do not direct water jets
on the components and/or
on the vending machine.
Check for correct brewing of beverages and adjust the
grinding when necessary.
To guarantee the correct operation of the vending
machine it is recommended to conform to the instructions
and times indicated in the "MAINTENANCE SCHEDULE".
To Next Page
Loading...
