Saeco Minuto - Machine Programming; Adjustable Machine Functions Overview

46 ENGLISH
9
Press the “ ” button to start the descaling cycle.
YellowYellow
10
The machine will start dispensing the descaling solution at intervals.
The bar on the control panel shows the cycle progress.
Note:
The descaling cycle may be paused by pressing the “
” button .To resume
the cycle, press the “
” button again. This allows you to empty the contai-
ner or to stay away from the machine for a brief period of time.
Yellow
11
When this icon is displayed, the water tank is empty.
RedRed
12
Remove the water tank, rinse it and  ll it up to the MAX level with fresh
water. Place it back into the machine. When inserting the water tank
into the machine, the display below is displayed.
13
Empty the drip tray and servings container and place it back.
14
Empty the container and place it back under the steam/hot water
wand and dispensing spout.
Yellow
15
Press the “ ” button to start the rinsing cycle.
16
When this icon is displayed, the water tank is empty. Repeat steps 12-
15. When the machine shows this icon again, continue with step 17.