English
10
110
Turn the flange housing cover clockwise and then remove it.
Wash all components with lukewarm water and pay
particular attention not to damage the fan.
Assemble the components in reverse order and connect
the dispensing hose correctly.
10.2.13 Cleaning the Containers
To clean the instant product container proceed as follows:
• Open the door.
• Remove the screw as shown in the figure.
• Remove the external cover.
• Remove the external cover from the instant product container.
• Remove the container by pushing it inwards in a way to
disengage the retainer A, then lift it up:
To Next Page
