English
5
79
• The all-pole switch must suit to machine input and be able
to detect all voltage polarities.
• Check that the electrical cables of the system are
proportioned to machine input.
Connect the appliance to the mains by means of the
power cord (G).
Make sure that the power
cord plug is easily
reachable after installation.
The electric socket or the
all-pole switch which the
appliance is connected to
must be easily accessible
for the user, so that the
user will easily disconnect
the appliance from the
electric mains when
necessary.
If the power cord is
damaged, it must be
replaced by the
manufacturer, its service
centre or by adequately
qualified personnel in
order to avoid any risks.
5.5 Mounting the Spoilers
Insert the left side spoiler as shown in the figure.
Do the same for the right side spoiler.
Insert the rear spoiler as shown in the figure.
To Next Page
Loading...
