Saeco NEXTAGE CAP010 - Technical Specifications

English
2
68
2.3 Appliance Identification
The appliance is identified by the model name and serial
number shown on the special plate.
ID Data plate
The plate contains the following data:
• name of the Manufacturer;
• marks of conformity;
• model;
• serial number;
• year and month of manufacture;
• supply voltage (V);
• supply frequency (Hz);
• electrical power consumption (W);
• number of phases of the power supply (PH);
• pressure allowed in the water network (MPa);
• appliance code.
It is strictly forbidden to
tamper with or modify the
data plate.
When contacting the
technical service, always
refer to this plate by
indicating the technical
data shown on it.
In case of any request to
the Authorised Service
Centres, indicate model
and serial number.
2.4 Technical Specifications
Size (w x h x d) 364 x 790 x 596 mm
Weight 60 kg
Power consumption See the data plate
Supply Voltage See the data plate
Electric voltage frequency See the data plate
Power cord length 3,000 mm
Water mains connection 3/8"
A-weighted sound pressure level less than 70 dB
Water network pressure See the pressure data plate