EasyManua.ls Logo

Saeco NEXTAGE CAP010 - Component-Specific Cleaning Procedures

Saeco NEXTAGE CAP010
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
10
99
10.2.2 Control Panel Cleaning
The control panel cleaning
must only be performed
with the power button set
to "0" or the door open.
Clean the control panel only with a damp cloth or with
detergents that are suitable for food contact.
10.2.3 Steam Wand Cleaning
Perform this cleaning
operation each time after
using the steam wand.
Clean the wand with a non-abrasive damp cloth.
If the wand is clogged, its end can be unscrewed and a pin
can be used to free the nozzles.
10.2.4 Hot Water Wand Cleaning
Clean the wand with a non-abrasive damp cloth.
If the wand is clogged, its end can be unscrewed and the
aerator can be immersed in a solution containing a
descaling agent.
10.2.5 Brew group cleaning
The brew group must be cleaned at regular intervals by
using the suitable tablets. A specific function is provided in
the machine maintenance menu in order to carry out this
operation, as explained below.
Switch on the machine as instructed in the "First Appliance
Start Up" section.
Press the "Customer menu" button.
Press the "Maintenance" writing.

Table of Contents

Other manuals for Saeco NEXTAGE CAP010

Related product manuals