Saeco SG200E - Page 38

38
English
Soluble 3
Sugar
Coffee C
Soluble 1
Soluble 2
- Banknote Value
Sets the value of banknotes transferred to the
machine from the parallel reader.
- Protocol
It allows to choose the protocol used by the
vending machine to communicate with the
payment system installed on the vending
machine:
1- Executive protocol;
2- BDV Protocol;
3- MBD Protocol;
4- PRICE HOLDING (ECS) Protocol.
5- No protocol
6- Master /Slave executive (the Vending
machine acts as a Master)
7- Master /Slave MDB (the Vending machine
acts as a Slave)
- Multivend
It allows to use possible residual credit to acquire
other beverages.
By setting N (no), the machine will store residual
credit.
- Overpay time
It establishes the maximum time (expressed in
seconds) after which the machine stores the
displayed residual credit. It can be adjusted in
10-second steps.
Setting 000 the function is disabled.
- Nation code
It allows setting the nation code - for example:
ITALY = 0039.
- Scale factor
It allows to set the number of zeros fixed in the
credit.
- Point position
It allows to set the point position of the decimal
in the credit.
BEVERAGE BREWING
The vending machine can brew 8 beverages in
direct mode, or up to 16, 8 of which by means of
the preselection. Each beverage can be
prepared using coffee beans and/or instant
products. The technician can choose the desired
products for the receipt (max 4) and the order of
use. Each component is identified by a number
or a digit (fig. 42).
- Sequence:
Is the order in which the products making up the
beverage are brewed.
0 means no product. Thus, the combination of
digits C300 or C030 or 0C30, means that
product 3 and coffee beans will always be
dispensed.
Based on the sequence, the settings of the
parameters relevant to the products making up
the beverage will be requested.
Fig. 42