Version 10.0 – July 2014
12
Enthalpy of Fusion Materials
A suitable supply of pure material was obtained.
This material is intended for the calibration of differential scanning calorimeters and
similar instruments.
Certified Values
Enthalpy of Fusion ............ 3.295 ± 0.010 kJ/mol
Melting Temperature .............. 156.60 ± 0.03 °C
A suitable supply of pure material was obtained and purified by zone refining.
This material is intended for the calibration of differential scanning calorimeters and
similar instruments.
Certified Values
Enthalpy of Fusion .......... 18.923 ± 0.083 kJ/mol
Melting Temperature ................ 80.25 ± 0.03 °C
The bulk material was purified by repeated fractional freezing from the melt.
This material is intended for the calibration of differential scanning calorimeters and
similar instruments.
Certified Values
Enthalpy of Fusion .............. 23.26 ± 0.10 kJ/mol
Melting Temperature ................ 94.85 ± 0.02 °C
A suitable supply of pure material was obtained.
This material is intended for the calibration of differential scanning calorimeters and
similar instruments.
Certified Values
Enthalpy of Fusion .......... 21.793 ± 0.085 kJ/mol
Melting Temperature .............. 114.34 ± 0.02 °C
The bulk material was purified by repeated fractional freezing from the melt.
This material is intended for the calibration of differential scanning calorimeters and
similar instruments.
Certified Values
Enthalpy of Fusion .............. 17.98 ± 0.04 kJ/mol
Melting Temperature .............. 122.35 ± 0.03 °C
A suitable supply of pure material was obtained.
This material is intended for the calibration of differential scanning calorimeters and
similar instruments.
Certified Values
Enthalpy of Fusion .............. 31.16 ± 0.13 kJ/mol
Melting Temperature .............. 147.19 ± 0.03 °C
To Next Page
Loading...
