Need help?Do you have a question about the SAES NEG Power mini and is the answer not in the manual?
Overview of symbols used within the manual for product identification and warnings.
Provides an overview of the NEG POWER MINI unit, its purpose, and capabilities.
Details the primary functions and operational characteristics of the NEG POWER MINI.
Describes the internal electronic design and power supply capabilities of the unit.
Explains the capabilities for controlling the unit remotely and managing multiple units.
Details the components and interface elements on the front panel of the NEG POWER MINI.
Identifies and describes the connectors and switches located on the rear panel.
Specifies the physical dimensions and weight of the NEG POWER MINI unit.
Lists the accessories that are included with the NEG POWER MINI unit upon purchase.
Instructions and considerations for installing the NEG POWER MINI into a standard 19-inch rack.
Guidance on making the necessary electrical connections for power and external interfaces.
Recommended methods for cleaning the unit to ensure optimal performance and longevity.
Steps for powering on the unit and performing the initial configuration and setup.
Details how to navigate and configure instrument parameters through the setting menu.
Configuration of the upper limit for pump temperature to prevent damage.
Explanation of how the instrument logs operational data to a USB flash memory.
Describes the conditions and resolution for the interlock safety circuit alarm.
Indicates an alarm condition where the pump is not properly connected or detected.
Details the alarm triggered by excessive output current, indicating a potential electrical issue.
Notification that the pump has exceeded its maximum safe operating temperature.
Covers alarms related to under-voltage or over-voltage conditions within the instrument.
Guidance on setting appropriate voltage levels for effective pump heating and activation.
Instructions on using the 'Trise' parameter for gradual ramp-up of voltage for heating.
Explanation of how to maintain pump temperature continuously without automatic stop.
Detailed pin assignment for the DB9 connector used for interface and interlock functions.
Lists available configurations and part codes for the NEG POWER MINI controller.
Details available cables and their compatibility with various SAES pump models.
Provides contact information and locations for sales and technical support services.
General| Brand | SAES |
|---|---|
| Model | NEG Power mini |
| Category | Power Supply |
| Language | English |
To Next Page
