Need help?Do you have a question about the SAES NEG POWER and is the answer not in the manual?
Provides an overview of the NEG POWER electronic unit, its versions, and key capabilities.
Details the primary functionalities and operational characteristics of the NEG POWER controller.
Explains the power supply specifications and the microprocessor-based electronic control card.
Describes the available standard (700W) and low power (150W) output modules.
Identifies and describes the components located on the front panel of the NEG POWER unit.
Identifies and describes the components located on the rear panel of the NEG POWER unit.
Details the components and layout of the front panel for the NEG POWER SMALL model.
Details the components and layout of the rear panel for the NEG POWER SMALL model.
Specifies the physical dimensions, rack size, and weight for the NEG POWER unit.
Specifies the physical dimensions, rack size, and weight for the NEG POWER SMALL unit.
Instructions for mounting the NEG POWER and NEG POWER SMALL in standard racks.
Guides users on correctly connecting power, interlock signals, and external interfaces to the instrument.
Outlines the safe and proper procedures for cleaning the NEG POWER unit.
Details the process of turning on the NEG POWER unit and the subsequent initialization sequence.
Describes the main menu screen used for monitoring operational parameters and overall system status.
Explains how to access and configure instrument settings such as date, time, and network parameters.
Covers the configuration of individual pump settings, including activation modes and operational parameters.
Details the process for setting security limits on voltage, current, power, and temperature to ensure safe operation.
Explains how to save current configurations or cancel changes to revert to previous settings.
Describes the usage of start and stop buttons for controlling power supply to the unit's outputs.
Lists preloaded recommended settings for various SAES NEG pumps, particularly for Activation Mode.
Explains how to maintain pump temperature continuously by adjusting the t_hold parameter.
Guides users on configuring settings for pumps not present in the presets, using the 'Custom' option.
Covers the interpretation, indication, and acknowledgment of system alarms.
Details how to review a historical log of all system alarms and their status.
Provides access to system details including software versions, serial numbers, and general operational data.
Presents the detailed pin configuration and assignments for the IN/OUT interface connector.
Provides information regarding the RS232/RS485 serial interface used for communication.
Lists specific NEG POWER models, power modules, and related accessories.
Provides information on various supply cables and accessories required for different pump types.
Lists contact details and geographical locations for sales and service operations.
General| Brand | SAES |
|---|---|
| Model | NEG POWER |
| Category | Controller |
| Language | English |
To Next Page
