M.HIST.0138.23 R1 Page 20 of 28 October, 06
th
2020
8. ELECTRICAL SPECIFICATIONS
Input:
Maximum Power 3.5 kW
Supply voltage 110-240 V~, +/-10%
Frequency 50/60 Hz +/- 10%
Input Current 10 A max
Mains cord connector IEC Type 10A 250V
Over-Voltage category II
Pollution degree 2
Isolation type class I
Altitude max up to 2000 m
Operating Temperature 0°C to 40°C
Relative Humidity 80%
Noise at 1 mt < 40 dBA
Output:
Output power 175 W + overload
Output Voltage 0-35 V
Supply Current 5 A
Overload 110%
9. MAINTENANCE
The supply needs minimum maintenance. Depending on the dust levels in the environment where
the device is being operated, a periodic check of the device is desirable. In case of dust
contamination it can be cleaned by means of a vacuum cleaner.
For repair the supply should be shipped back to Saes Group S.p.A..
To Next Page
Loading...
