USER MANUAL - SIP POWER ION PUMP CONTROLLER
M.HIST.0109.23 Rev.1 Page 53 of 62
12. SPECIFICATIONS
IP Section
Pump output (HV) connector BNC (HV)
Nominal output voltage 5 kV±2 %
Range of adjustment 1÷6 kV
Output voltage polarity positive
Maximum output current 65mA @ 350Vdc
Obtainable output power 25–35 W
Output Protections
Current electronically limited at 3.0 A ( @ 6kV )
Complete unit
Outputs
4× current comparators-switches* on: Z = 13±2 Ω
positive feeding voltage +5 V / 20 mA
negative terminal GND
* max. voltage between switched off terminals 30 V
max. current through connected terminals 100 mA
Inputs
interlock enable input 2–10 mA / 2 kΩ
Communication interface Ethernet standard interface
RS485 38400 Bd, 8 data bits, 2 stop-bit
Input voltage 24 Vdc
Maximal input current 2 A
Weight 1 kg
Ambient temperature at operation 5÷40 °C
Relative humidity 20÷80 %
To Next Page
Loading...
