- 10 -
Data Field Display Function& Programming Options [ ] = Programmed Table 1 Default Values
90
9090
90
EVNT LOG OPTIONS
EVNT LOG OPTIONSEVNT LOG OPTIONS
EVNT LOG OPTIONS
Event Logging
Note: System messages are logged when
any non-zero selection is made.
[3]
0 = None; 1 = Alarm/Alarm Restore; 2 = Trouble/Trouble Restore; 4 = Bypass/Bypass
Restore; 8 = Open/Close.
Example: To select “Alarm/Alarm Restore”, and “Open/Close”, enter 9 (1 + 8); To select
all, enter #15.
91
9191
91
AAV/REM
AAV/REMAAV/REM
AAV/REM
PHN
PHN PHN
PHN
CTRL
CTRLCTRL
CTRL
Alarm Audio Verification (AAV)/Remote Phone Control
[2]
0 = None
1 = AAV and remote phone control
2 = remote phone control only
4 = AAV only
Notes: (1) In order to activate the Remote Phone Control feature and defeat an answering machine,
ensure that the correct ring detection count (“15”) has been programmed in field ✻95.
(2) Remote phone session will be terminated if a report must be sent.
(3) Alarm Audio Verification will only function when Contact ID® is selected. AAV cannot be
used for UL installations.
(4) If an alarm will be reported to primary and secondary phone numbers, AAV can only
function via the secondary number.
(5) If an alarm will be reported to a follow me phone number (10-12 in field ✻49) AAV cannot
be used.
(6) If AAV is selected and LRR/IP communications device is enabled, you must enter "0"
(primary dialer preferred channel) as the second entry in Field ✻77.
92
9292
92
SWINGER SHUTDOWN
SWINGER SHUTDOWNSWINGER SHUTDOWN
SWINGER SHUTDOWN
Swinger Shutdown
[1]
1 = shutdown after one alarm; 2 = shutdown after two alarms
Note: The control validates the data entered in this field. If the selection is not valid the control will
emit a single long beep indicating that the selection has been rejected. The control replaces
the selection with the default value “1”, which is displayed on the keypad, and advances to
the next field.
DOWNLOAD INFORMATION (✻93–✻95)
93
9393
93
FLEXBLE
FLEXBLE FLEXBLE
FLEXBLE
CALLBACK
CALLBACKCALLBACK
CALLBACK
Flexible Callback
[0]
0 = No flexible callback; 1 = Last digit flexible;
2 = Last 2 digits flexible; 3 = Last 3 digits flexible
94
9494
94
DOWNLOAD
DOWNLOAD DOWNLOAD
DOWNLOAD
PHONE
PHONEPHONE
PHONE
#
Download Phone Number
Note: In UL installations, downloading may only be performed if a technician is at the site.
Enter up to 20 digits, 0–9; #+11 for '✻'; #+12 for '#'; #+13 for a pause. Do not fill unused
spaces. If fewer than 20 digits entered, pressing ✻ advances to the next field. To clear
entries from field, press ✻94✻.
95
9595
95
RING
RING RING
RING
DET
DET DET
DET
COUNT
COUNTCOUNT
COUNT
Ring Detection Count for Downloading/Remote Phone Control Mode
[15]
0 = Disable Station Initiated Download
1–14 = number of rings
(1–9, [#]+10 =10, [#] +11 =11, [#] +12 =12, [#] +13 =13, [#] +14 =14);
15 = answering machine defeat ([#] +15 =15)
To Next Page
Loading...