Safewatch QuickConnect Plus - Safewatch QuickConnect Plus Control Defaults

- 23 -
Safewatch QuickConnect Plus Control Defaults
By activating *96, Field 43, and 44 will be changed to 15, 15, 15, 15.
Function Default
*20 Installer code 6321
*21 Quick arm enable 1
*22 Keypad backlight timeout 0
*23 Forced bypass 1
*24 RF house ID code 0,0
*25 Powerline carrier device house code 0
*26 Chime-by-zone 0
*27 Real-time clock display 1
*29 Daylight saving time start/end month 3,11
*30 Daylight saving time start/end weekend 2,1
*31 Single alarm sounding per zone 0
*32 Fire sounder timeout 0
*33 Alarm bell timeout 1
*34 Exit delay 6,0
*35 Entry delay 1 (zone type 01) 3,0
*36 Entry delay 2 (zone type 02) 3,0
*38 Confirmation of arming ding 0
*39 Cross zone timer 0
*40 PABX access code/Call waiting disable ---
*41 Primary phone number ---
*42 Secondary phone number ---
*43 Primary subscriber account number 15,15,15,15
*44 Secondary subscriber account number 15,15,15,15
*46 “Follow Me Reminder” Phone Number ---
*47 Phone system select 5
*48 Report format for primary/secondary 7,7
*49 Split/dual reporting 0
*50 Burglary abort window 2
*51 Periodic test report 0
*52 First test report offset 2
*53 Sescoa/radionics select 0
*54 Lack of usage notification 0
*55 Reporting channels 0
*56 Enhanced zone programming See *56 table
*57 False alarm options 7
*58 RF jam detection 0
*59 Exit error report code 1
*60 Trouble report code 1,0
*61 Bypass report code 0,0
*62 AC loss report code 0,0
*63 Low battery Report code 1,0
*64 Test report code 1,0
*65 Open report code 0
*66 Arm away/stay report code 0,0
*67 RF transmitter low battery report code 1,0
*68 Cancel report code 1,0
*69 Recent close report code 1
*70 Alarm restore codes 1
*71 Trouble restore report code 1,0
*72 Bypass restore report code 0,0
*73 AC restore report code 0,0
*74 Low battery restore report code 1,0
*75 RF transmitter low battery restore report code 1,0
*76 Test restore report code 1,0
*77 Dynamic Signaling Delay/ Dynamic Signaling Priority 0,0
*78 Programmable Tone Generation Time 0,0
*80 Powerline Carrier Devices See *80 table
*81 Zone lists for devices See *81 table
*84 Assign zone voice descriptors See *84 programming
*86 Multi-mode (E-mail notification) 0
*87 Auxiliary Function/ 1-button paging 0
*88 Pager characters ---
*89 Event log 80% full report code 0,0
*90 Event logging 3
*91 Alarm audio verification/remote phone control 2
*92 Swinger shutdown 1
*93 Flexible call back 0
*94 Download phone number ---
*95 Ring detect count for downloading/remote phone control 15
Default Master Code 1,2,3,4
Default Duress Code ---