Saftronics VG5 Series - Page 47

46 VG5 Installation & Quick-Start Manual
Quick-Start Parameter Sequence
* Depress the Menu key on the digital operator to return to Main Menu: Operation.
Main Menu * Key Press Function
Parameter
No.
Operation
Frequency Reference U1-01
∧ Output Frequency U1-02
∧ Output Current U1-03
∧ Output Voltage U1-06
∧
DATA/ENTER
U2Fault Trace
U2-01 to U2-14
U2
∧
DATA/ENTER
U3Fault History
U3-01 to U3-08
U3
∧
DATA/ENTER
U1Monitor
U1-01 to U1-14
U1
Initialize
ESC, ∧,
DATA/ENTER
Select Language A1-00
∧ Access Level A1-01
∧ Control Method A1-02
∧ Initialize Parameters A1-03
∧ Enter Password A1-04
Programming
ESC, ∧, ∧,
DATA/ENTER
Reference Source B1-01
∧ Run Source B1-02
∧ Stopping Method B1-03
∧ Acceleration Time 1 C1-01
∧ Deceleration Time 1 C1-02
∧ Preset Frequency Reference 1 D1-01
∧ Preset Frequency Reference 2 D1-02
∧ Preset Frequency Reference 3 D1-03
∧ Preset Frequency Reference 4 D1-04
∧ Jog Frequency Reference D1-09
∧ Input Voltage E1-01
∧ Motor Selection E1-02
∧ V/f Pattern Selection E1-03
∧ Maximum Frequency E1-04
∧ Maximum Voltage E1-05
∧ Maximum Voltage Output Frequency E1-06
∧ Middle Output Frequency E1-07
∧ Middle Output Voltage E1-08
∧ Minimum Output Frequency E1-09
∧ Minimum Output Voltage E1-10
∧ Base Voltage E1-13
∧ Motor Rated Current E2-01
∧ Motor Rated Slip Frequency E2-02
∧ Motor No-Load Current E2-03
∧ Number of Motor Poles E2-04
Auto-Tuning
ESC, ∧, ∧, ∧,
DATA/ENTER
Rated Voltage --
∧ Rated Current --
∧ Rated Frequency --
∧ Rated Speed --
∧ Number of Poles --
∧ Select Motor 1 or 2 --
Modified Constants
ESC, ∧, ∧, ∧, ∧,
DATA/ENTER
Chapter 3 - Quick-Start Programming
Quick-Start Parameter Sequence
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com