Need help?Do you have a question about the Saftronics FP5 Series and is the answer not in the manual?
Overview of the FP5/GP5 inverter series and its features.
Technical specifications for FP5/GP5 inverters, including models and ratings.
Steps for checking the inverter unit and its components after unpacking.
Guidelines and precautions for installing the FP5/GP5 inverter unit.
Instructions and precautions for connecting power and control wiring to the inverter.
Procedures for initial testing and safe operation of the FP5/GP5 inverter.
Description of the JVOP-130P digital operator display and keypad functions.
Explanation of status indicator LEDs on the digital operator.
How to select between LOCAL and REMOTE operation modes.
Detailed explanation of all programmable parameters (n001 to n116) for the FP5/GP5.
Procedure for setting up and initializing inverter parameters, including password.
Configuration options for various operational features like Accel/Decel, retry, and carrier frequency.
Configuration of multi-function input and output signals and analog inputs.
Procedures for periodic inspection and maintenance of the FP5/GP5 inverter.
Explanation of alarm and fault codes and their corrective actions.
Troubleshooting guide for common motor-related faults and their solutions.
General| Output Frequency Range | 0-400 Hz |
|---|---|
| Cooling Method | Forced air cooling |
| Power Range | 0.4-630 kW |
| Control Method | V/f control, sensorless vector control |
| Overload Capacity | 150% for 60 seconds |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, short circuit, ground fault, overheating |
| Communication Interfaces | Modbus RTU |
| Operating Temperature | -10°C to +50°C |
| Ambient Humidity | Less than 95% RH (non-condensing) |
| Enclosure Rating | IP20 |
| Braking Option | Built-in braking unit (for certain models), External braking resistor (optional) |
| Keypad | Detachable LCD keypad with parameter copy function |
To Next Page
