Need help?Do you have a question about the Saftronics FP5/GP5 Series and is the answer not in the manual?
General| Cooling Method | Forced air cooling |
|---|---|
| Series | FP5/GP5 |
| Input Frequency | 50/60Hz |
| Output Frequency | 0~400Hz |
| Overload Capacity | 150% for 60 seconds |
| Braking Unit | Built-in |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit, Ground fault |
| Communication | Modbus RTU |
| Operating Temperature | -10°C to +50°C |
| Humidity | 5% to 95% RH (non-condensing) |
| Altitude | Up to 1000m (Derating required above 1000m) |
| Storage Temperature | -20°C to +65°C |
Procedures and checks for inspecting the inverter upon receipt.
Identifying the different components of the FP5/GP5 inverter.
Steps for removing and reattaching the digital operator.
Recommendations for selecting a suitable mounting location.
Required space around the inverter for cooling and installation.
Overview of the main and control circuit connection diagrams.
Detailed guidance for wiring the main power circuit of the inverter.
Instructions for wiring the control circuit of the inverter.
Proper grounding procedures and requirements for the inverter.
How to select between LOCAL and REMOTE operation modes.
Items to check before performing an initial test run.
Procedures for conducting a test run of the inverter.
Explanation of the keys and indicators on the digital operator.
Understanding the status indicated by the Quick-Start LEDs.
How to set and initialize constants.
Configuring the V/f pattern for motor control.
Adjusting various parameters for optimal operation.
Choosing how the inverter stops the motor.
Configuring motor overload and protection features.
Using MEMOBUS for serial communication.
Guidelines for periodic inspection of the inverter.
Recommended schedule for replacing parts.
Identifying faults and taking corrective actions.
Understanding inverter alarm displays and their meanings.
Troubleshooting motor-related faults.
Overview of the inverter's standard specifications.
Physical dimensions and mounting details of the inverter.
Connection diagram for the braking resistor unit.
Connection diagrams for braking unit and resistor unit.
A comprehensive list of all inverter constants and their settings.
Information displayed on the digital operator.
To Next Page
